Safeguard Security

 Chains, Anchors and Padlock Brackets
Safeguard Security Chain (SSC)
The Safeguard 11.2 Chain is manufactured from the very highest quality alloy steel to ensure maximum protection from attack.
During manufacture the chain undergoes a unique hardening process to ensure maximum resistance against criminal attacks such as freezing, sawing and bolt cropping.
Finished in gold, the chain is enshrouded by a protective heat shrunk heavy duty, flexible PVC sleeving.
Every 16th link is stamped SSC as confirmation of the highest standards in performance testing.
It is available from stock in the following lengths:
    1.0, 1.2, 1.4, 1.5 and 2.0 metres
Lengths over 2.0 metres can be ordered up to a maximum of 25 metres.

NOTE: This chain is lighter and more flexible than most other "high security" chains yet in lab tests carried out independently it "equalled or out-performed the best of the rest".

SOLDSECURE •  RIDE MAGAZINE - Best Buy and Insurance Approved

Capstan Bolt-Down
Manufactured from the highest quality materials.
Fully hardened and Zinc Plated.
The Anchor consists of a central rotating capstan to deflect sledgehammer attacks to the anchor and chain and preventing any form of purchase.
Each Anchor comes supplied with four Excaliber fixing bolts for easy fixing to the concrete, with hardened steel tapered interferance-fit caps that when hammered into place completely encase the head of the bolt preventing any removal.

Click here to see the fitting diagram.

 


Capstan Concrete-In
Manufactured to the same high spec as the Capstan Bolt-down, this anchor posesses the same rotating eyelet as the bolt-down model, but is designed to be sunk in to concrete. The stem has two lateral "stays" in which the concrete will set around for absolute security.

Click here to see the fitting diagram.

 
In-Turn Anchor
Manufactured from heavy-duty steel rectangular box-section which is then welded to a baseplate that is wider than the box-section to allow grip in the concrete. In the center is a 30mm hardened solid steel rotating crossbar positioned below a 25mm hardened steel protection crossbar. This is all then powder coated for protection from the elements in red or pale blue.

Click here to see the fitting diagram.

 

Ex-Turn Anchor
 Almost the same construction as the "In-Turn" but with four counter-sunk holes on the (slightly smaller) baseplate situated inside the box section, using counter sunk Excaliber security bolts (supplied) for adhesion to the floor. When in-place hardened steel ball bearings (supplied) are driven into the head of the bolt to prevent removal

Click here to see the fitting diagram.

 


Padlock Bracket
 Purpose designed High Security Padlock Bracket. Supplied complete with fixing kit. All case hardened steel construction, finished in zinc plate.

Suitable for doors, containers etc. Right or left hand opening.

In conjunction with the Rotalok Padlock - its the ultimate lock out.
 


Special Motor Bike Offer (less 25%)

Buy a chain, an anchor and a Rotalok Padlock with a Mul-T-Lock lock and get 25% off the retail price

Carriage £12 to most parts of mainland UK